Portable Winch Pulling / Lifting Winch - PCH1000

Capable of handling both pulling and lifting operations, the PCH1000 Gas-Powered Pulling/Lifting Winch is truly one of a kind.

The PCH1000 utilizes an innovative rope grabbing system that works by holding a load in position, permitting the operator to work safely. Pulling on the rope will start the centrifugal clutch, and if the operator stops pulling the rope, the throttle goes back down, and the drum stops turning, ensuring the rope grabbing system holds the load in position. This rope grabbing system allows for lifting tasks to be performed, as well as the lowering of loads.

Applications the PCH1000 Pulling/Lifting Winch are suited for include search and rescue, forestry, hunting, arboriculture, and marine. Use it to pull wires, fiber optic, cables through conduits, pull boats, docks, water fences. Or you can use this winch to lift heavy equipment, lift transformers, raise towers, and more.

Please note that this winch can be used with any length rope but the rope diameter must be a minimum 3/8" and a maximum 5/8" for PULLING applications. For LIFTING applications, the PCH1000 can be used with any splice eyed length rope and must have minimum and maximum diameter of 1/2". Spliced eyed ropes are MANDATORY for lifting applications.

Features

• Driven by a Honda GXH-50 cc 4-stroke 2.1 HP gas engine
• Max. Pulling Force: 1700 lbs.
• Rated Lifting Capacity: 550 lbs.
• Pulling Speed with installed drum (PCA-1110): 40' per minute
• Pulling Speed with optional drum (PCA-1100): 60' per minute
• 110:1 gear ratio
• Centrifugal clutch system
• Rope Grabbing System included (can be disabled if necessary)
• CE Certification
• Comes with a PCA-1260 Polyester Sling (6' length)
• Weighs 42 lbs.